top of page

PUBLISHED WORK

The Fruits of Our Labor

Updated March 1, 2020

​해외/국내 등재지 저널 (KCI, SCI, SCOPUS)

  1. Hyunsu Kim, jiman Kim, Kwangkyu Han and Dongkyu Won,"1D Modeling Considering Noise and Vibration of Vehicle Window Brushed DC Motor", Accepted in 2022. (SCIe)

  2. Hyunsu Kim, Yoounjung Kwon, Sangwoo Lee, Juin Kim, Dongchul Park "Development of a Metasilencer Considering Flow in HVAC Systems" Accepted in 2022.(SCIe)

  3. Hyunsu Kim, Sangwoo Lee"A Study on the Efficiency in the Energy Harvesting Device Using Resonance of Pendulum" Accepted in 2022.(SCIe)

  4. High-speed Fan Noise Reduction Device Using a Continuous Helmholtz Resonator, Trans. Korean Soc. Mech. Eng. A, Vol. 46, No. 4, pp. 363~369, 2022(KCI)

  5. Back EMF Measurement Method and Consideration for Predicting Vibration of Brushed DC Motor, Journal of the Korean Society of Manufacturing Process Engineers, Vol.21 No.12 pp.108-113(KCI)

  6. Hyunsu Kim, jiman Kim, Kwangkyu Han and Dongkyu Won,"1D Modeling Considering Noise and Vibration of Vehicle Window Brushed DC Motor",  Accepted in 2022. (SCIe)

  7. Hyunsu Kim, Yoounjung Kwon, Sangwoo Lee, Juin Kim, Dongchul Park "Development of a Metasilencer Considering Flow in HVAC Systems" Accepted in 2022.(SCIe)

  8. Hyunsu Kim, Sangwoo Lee"A Study on the Efficiency in the Energy Harvesting Device Using Resonance of Pendulum" Accepted in 2022.(SCIe)

  9. High-speed Fan Noise Reduction Device Using a Continuous Helmholtz Resonator, Trans. Korean Soc. Mech. Eng. A, Vol. 46, No. 4, pp. 363~369, 2022(KCI)

  10. Back EMF Measurement Method and Consideration for Predicting Vibration of Brushed DC Motor, Journal of the Korean Society of Manufacturing Process Engineers, Vol.21 No.12 pp.108-113(KCI)

  11. Hyunsu Kim and Iljae Lee, “Effect of Flow on Various Helmholtz Resonators”, International Journal of Acoustics and Vibration, accepted in 2020. (SCIe, IF = 0.375)

  12. Hyunsu Kim and  Ahmet Selamet , “Effect  of flow on a dual Helmholtz resonator”, Journal of Mechanical science and Technology, 34,581-588, 2020. (SCIe, IF = 1.865)

  13. Hyunsu Kim, “Sound Quality Analysis of Baby Crying Voices”, Journal of the Ergonomics Society of Korea, 38(1): 39-47, 2019. (KCI)

  14. Hyunsu Kim and Iljae Lee, “Acoustic Performance of Turbocharger Resonator with Flow Effect”, Trans. Korean Soc. Noise Vib. Eng., 27(5) : 616~621, 2017. (KCI)

  15. Hyunsu Kim and Jong-Yun Yoon, “Frequency response function of motors for switching noise energy with a new experimental approach”, Journal of Mechanical Science and Technology 31 (6) 2671~2677, 2017. (SCIe, IF = 1.282).

  16. Hyunsu Kim, Byeongil Kim and Won-ok Han, “Noise Reduction of Electric Vehicle using Passive Damping Material”, Journal of The Institute of Electronics and Information Engineers, Vol.54, NO.6, 959 – 964, 2017. (KCI)

  17. Hyunsu Kim, S.K. Kang, Y.S. Lim, “Muffler Design Using Transmission Loss Prediction Considering Heat and Flow”, (selected as one of best papers), Trans. Korean Soc. Noise Vib. Eng., 24(8): 600 – 605, 2014. (KCI)

  18. Hyunsu Kim and Ahmet Selamet, “Acoustic performance of a Helmholtz resonator with flow”, International Journal of Vehicle Noise and Vibration, Vol. 7, pp. 285 – 305, 2011. (Scopus)

  19. M.B. Xu, Ahmet Selamet, and Hyunsu Kim, “Dual Helmholtz resonator’, Applied Acoustics, Vol. 71, pp. 822 – 829, 2010. (SCI, IF = 1.097)

  20. I.-J. Lee, Ahmet Selamet, Hyunsu Kim, T.C. Kim, and J. Kim, “Design of a multi-chamber silencer for turbocharger noise”, SAE International Journal of Passenger Cars, Mechanical System, Vol. 2, Part I, 1339 – 1344, 2009. (Scopus)

  21. Ahmet Selamet, Hyunsu Kim, and Norman T. Huff, “Leakage effect in Helmholtz resonators,” Journal of Acoustical Society of America, vol. 126, pp. 1142 – 1150, 2009. (SCI, IF = 1.646)

Updated November 5, 2021

​국제/국내 컨퍼런스 (CONFERENCE/PROCEEDINGS)

  1. 이상우, 김현수,"진자의 공진을 이용한 발전기의 효율적 설계에 관한 연구", 추계기계가공학회 2022.

  2. 권윤정, 김현수,"유동을 고려한 메타 소음기 개발", 추계기계가공학회 2022.

  3. 김지만, 김현수,"Brushed DC 모터의 진동 예측을 위한 실험 장치 설계법 고찰", 추계기계가공학회 2022.

  4. 허상영, 김현수,"자율주행자동차 EDR, DSSAD 개선 법안 설계", 추계기계가공학회 2022.

  5. 김시연, 김현수,"전기자동차의 파워트레인 설계에 관한 연구", 추계기계가공학회 2022.

  6. 이상우, 김현수,"유동을 방해하지 않는 음향 메타 사일런서 제작", 춘계기계가공학회 2022.

  7. 권윤정, 김현수,"위상차 선정에 따른 설계 변수 연구", 춘계기계가공학회 2022.

  8. 김지만, 김현수,"Learning – based Motion Magnification을 이용한 진동 취약부 보완 설계", 춘계기계가공학회 2022.

  9. 허상영, 김현수,"ADS 차량 평가법 개선을 통한 ADAS 설계", 춘계기계가공학회 2022. 

  10. 이상우, 김현수, "외팔보를 진자로 이용하는 원심진자흡진기에 관한 연구", 추계대한기계학회 2021.

  11. 권윤정, 김현수, "연속된 헬름홀츠 공명기를 이용한 소형 이동식 집진 시스템의 고속 축류 팬 소음 저감 장치", 추계대한기계학회 2021.

  12. 이상우, 조상재, 조수미, 김현수, “1D 해석을 통한 다이내믹 전달오차 측정장비 설계”, 춘계소음진동공학회 2019. 

  13. 이상우, 조상재, 이대승, 조수미, 김현수, “1D 해석 소프트웨를 이용한 주입기체에 따른 NVH 해석”, 추계소음진동공학회 2018. 

  14. 조상재, 이상우, 이대승, 조수미, 김현수, “전기자동차 구동시스템 모델링을 통한 스위칭 소음 해석”, 추계소음진동공학회 2018. 

  15. Jangwon Lee, Hyunsu Kim, Yong Wook Jin, Jae Woong Hwang, Chang Kook Chae, Dong Kyu Yoo, “Development of the input shaft damper with a new concept for torsional vibration reduction in the manual transmission”, FISITA 2016. 

  16. Myunggu Kim and Hyunsu Kim, “Abnormal Electromagnetic noise of Motors depending on Fixing Methods of Permanent Magnets”, EVS28 2015. 

  17. D. Yoon, D. Choi, J. Kim, Hyunsu Kim, “A study of current control method based on Random-PWM for HEV sonic noise reduction”, Power Electronics Annual Conference, Korea, 2014. 

  18. Moosuk Kim, Hyunku Lee, Saman Hong, Kihyup Kim, Hyunsu Kim, “An experimental research for the CVT oil pump noise”, FISITA 2014 World Automotive Congress, Maastricht, Netherland, 2014. 

  19. Hyunsu Kim, Sangkyu Kang, Yun-soo Lim, and Hak-son Han, “Muffler design using transmission loss prediction considering heat and flow”, 2013 Hyundai Motor Group Conference, Hwaseong, Korea, 2013. 

  20. Emel Selamet, Ahmet Selamet, Asim Iqbal, and Hyunsu Kim, “Effect of flow on Helmholtz resonator acoustics: A three-dimensional computational study vs. experiments”, SAE International, 2011-01-1521. 

  21. Il-jae Lee, Ahmet Selamet, and Hyunsu Kim, “Effect of leakage in Helmholtz resonator”, Journal of Acoustical Society of America, Vol. 122. pp. 3053, 2007 

  22. Mark Rucker and Hyunsu Kim, “Tools for bearing failure prognosis – Toyota testbed”, 2005 IMS 10th Industrial Advisory Board Meeting, Georgetown, KY, 2005.

bottom of page